Mashiinka EDM la qaadi karo
Astaamaha:
Mashiinka EDM ee 1.Protable wuxuu si degdeg ah uga saari karaa tuubooyinka jaban, daloolista, qulqulka, iwm, iyada oo aan waxyeello u geysan qaybta shaqada. Maxaa quseeya saldhigga magnetic iyo istaagga iskutallaabta si ay u taageeraan madaxa, waxaa lagu dhejin karaa meel kasta, hagaajin jihada hab-socodka si buuxda. Waxaa lagu dabaqi karaa cabbir kasta oo ka mid ah qaybaha shaqada, gaar ahaan waxtar u leh qalabka mashiinka waaweyn.
2.Xawaaraha farsamaynta godka gaaban wuxuu ku saabsan yahay 1mm / min.
3.Madaxa shaqada oo leh shaqeyn gariir.
Sharaxaada Alaabta:
Mabda'a shaqada
Isticmaal qalabka shaqada iyo korantada taabashada tuubada jaban ee dhimbiil gaaban oo gaaban, tuubada jabtay daxalka, xoogaa ka saar tuubada jaban.
Codsiga
1.Ka saar jaban ee tuubada dhexroorka workpiece, dalool, reamer, qalab /qalabka sida fur, cabirka;
2.Waxay noqon kartaa ka shaqaynaysa in size kasta, qaabka workpieces.
3.Xalooyin kala duwan, qaabab kala duwan oo ka soo dusha sare ee electrodes, processing godad badan.
4.Processing lahayn dalool shuruud sax ah.
5.Gaar ahaan ku habboon adag tahay in la farsameeyo workpieces waaweyn inMashiinka EDM.
| Soo saarista Korontada Machining SD-1000D/Aaladaha Dabiiciga ah ee Korontada jabay | ||
| Module | MW-600W | MW-1000W |
| Gelida | AC220V 50/60HZ | AC220V 50/60HZ |
| Awood | 600W | 1000w |
| Voltage | 80V | 80V |
| Kala duwanaanshaha korantada | 0.5mm-10mm | 0.5mm-10mm |
| Safarka gacanta | 310mm | 310mm |
| Safar toos ah | 60mm | 60mm |
| Xawaaraha socodsiinta | ≥1mm/daqiiqo | ≥1.5mm/min |
| Cabbirka | 380*200*320mm | 380*200*320mm |
| Miisaanka | 15KG | 17KG |
Agabka caadiga ah:
1.Qadka Korontada
2.Copper Electrode
3.Transmission Line
4.Qadka Biyaha
5.Electrode Clamp
6. Xiriiriyaha
Doorashada korantada (tubbada jaban, boolal, tusaale ahaan)
Marka loo eego xajmiga sheyga jaban si aad u dooratid qaabka korantada ku habboon iyo cabbirka qalabka korantada, oo dooro silig naxaas ah. ul naxaas ah ama tuubo naxaas ah, iwm
| Wax jebi | Heerka | Ku talin electrode | Xusuusin |
| maroojin | M3 | Ø1.5 | shotr electrode oo yaree jitter |
| maroojin | M4 | Ø2.0 | |
| maroojin | M6 | Ø3.0 | |
| maroojin | M8 | Ø4.0 | |
| maroojin | M10 | Ø5.0 | |
| maroojin | M12 | Ø6.0 | |
| maroojin | M14 | 7x2 | Elektroodka xaashida |
| maroojin | M16 | 8x2 | |
| maroojin | M20-30 | 10x2 | Tuubada ka sarreysa M20 waxaa laga baaraandegi karaa dhowr jeer |
| bool | M3-20 | Habka lagu taliyay: samee "-" qaab jeexdin qoto dheer oo ku marooji kaashawiito | |
Saamaynta alxanka
Mabda'a Daxalka Electrolytic, wax dhaawac ahi ma soo gaadho qaybta shaqada
1.Ka saar jaban ee tuubada dhexroorka workpiece, dalool, reamer, qalab /qalabka sida fur, cabirka;
2.Waxay noqon kartaa ka shaqaynaysa in size kasta, qaabka workpieces.
3.Xalooyin kala duwan, qaabab kala duwan oo ka soo dusha sare ee electrodes, processing godad badan.
4.Processing lahayn dalool shuruud sax ah.
5.Gaar ahaan ku habboon inay adag tahay in la farsameeyo qaybo waaweyn oo shaqo ah oo ku jira mashiinka EDM
